93-98 Ranger Race Cage

$2,600.00 $2,500.00

  • CNC cut and bent
  • All USA DOM .120 wall
  • 2” Main tubes, 1.75 tie ins, 1.5” gussets
  • Full 360 degree weld able
  • Stock dash and Door panels can stay intact (with modifications)
  • Factory Heat and AC ducts can be modified to retrofit back in stock location
  • Heater core stays in factory location
  • Roof sheet metal is removed to allow more head room and a tighter fit
  • Consists of 75’ of 2” DOM, 80’ of 1.75”DOM, 43’ of 1.5” DOM in each cage, not including the 16′ plus of waste.
  • Each tube is labeled and marked for adjacent tube placement
  • Seat bar tubes and harness bars included just add tabs
  • Set up to be a 3 seater
  • Easily modified for your own touches and needs.
  • Race legal (you are responsible for reading rules and following them and adjust as needed)
  • PDF of tube layout and rough instructions provided
  • With 2-3 friends you can have the cage in and welded in about 24hrs of work. Cab prep and panel R&I takes the longest.
  • Does not fit EDGE models, require extra attention from you for fitment, you may need to add or subtract to frame tie in tubes. This may be the case with newer XLT with EDGE trim. 


2-3 week lead time, please contact for product time lines. Most large parts are made to order and shipped via freight.


Disclaimer:  T.E.Designs makes no warranties expressed or implied with regard to any product and/or installation including but not limited to the warranties of merchantability and fitness for a particular purpose. TEDesigns products and/or installations are for off-road use only. These products and/or installations therefore do not match with the vehicle manufacturer’s parts or specifications. The purchaser acknowledges that the purchase of these parts and/or installation may cause the vehicle to be unlawful to operate on public highways. The purchaser further acknowledges that no representations have been made to them with regard to the performance, safety or quality of these parts and/or their installation in the purchaser’s vehicle, and that the parts and/or installation may void the vehicle manufacturer’s warranty. TE Designs retains no liability for any damage, injuries, and/or death caused directly or by association with TE Designs products or installation. Purchaser must check with their rule book on cage to meet specs and modify as needed. The purchaser indemnifies TE Designs company name its employees, partners, and affiliates from all liability and waives their right to legal recourse against TEg Designs and its employees, partners, and affiliates. TE Designs is not responsible for shipment damages or lost items during shipment. Customer must take their own actions against the shipping provider and or broker. By purchasing this product you are agreeing to all terms stated.


There are no reviews yet.

Be the first to review “93-98 Ranger Race Cage”

Your email address will not be published. Required fields are marked *