(1 customer review)

99-06 2wd Chevy Long Travel Kit, discontinued for now.

$2,000.00 $1,600.00

  • 99-06 Chevy 1500 2wd only.
  • This LT kit uses Factory pivot points for easy install and fabrication. Can easily beTig weld!
  • LASER cut not Plasma cut! CNC formed.
  • Shock combination is a 10” 2.5 CO and 3.0 BP with Mazzulla lay out.
  • Comes with all the formed sheet metal parts including:
  • Formed Tower kit.
  • Upper arm and pocketed lower arm, using a 1.5″ uniball
  • Fabricated spindle with 3/8” caliper mount for factory caliper. Snout block is a 1 5/8” thick milled from 1080 (not sheet metal like other companies), 1″ upper uniball
  • 3/8” wall DOM milled tie rods (no bungs)
  • Custom machined billet 1080 clevis 
  • Custom machined billet clevis bolt
  • NO BS, honest 17.5” of travel, 4.5 wider than stock.
  • Comes with factory bolt A arm reinforcement kits.
  • All pivot points are vertical to allow the uniballs to last longer and have the correct load forces.
  • You provide the Uniball and Heim hardware. Talk to Tylor at Kartek he will hook you up.
  • Good turning radius (for a LT kit, LT kits do not turn as good as a stock truck)
  • Designed to be able to TIG or MIG weld
  • You must use roughly 4.5” backspace on rims (each rim varies)
  • Good Uniballs and heims are not cheap, and this kit uses the big stuff. You can easily spend $1500 in high quality joints and misalignment spacers.
  • If you are not a competent fabricator, please do not purchase. Anytime you working with formed sheet metal, additional work by you may need to be done.

2-4 week lead time, please contact for product time lines. Most large parts are made to order. With COVID please allow for extra lead time. 


Chevy 1500 joints list.


(2) 1” Uni ball, with cup (spindle)

2) Misalignment spaces 1” 5/8” bolt, 3-1/16” stack height (spindle)

(2) 1.5”Uniball with cup (spindle)

(2) Misalignment spaces ¾” bolt, 3.5 stack height (spindle)

(2) Inner steering heims HRSMX10T, 5/8×3/4

(2) Outer steering heims LEFT 7/8 heim, spacers 9/16” bolt, 2-1/8” stack height

(2) Misalignment spacers for above heims

(4) Heim joints 7/8 bore 7/8 shank (upper)

(8) Misalignment spacers 7/8”  heim, ½ bolt, 2-1/8” stack height

(4) Misalignment spacers 7/8”  heim, ½ bolt, 1.5” stack height

(8) Delran Bushing, 1” Inside Diameter, 1.5” outside, 1-3/8” total length (KTK600W)

(2) Delran Bushing, 1” Inside Diameter, 1.5” outside, 2-1/16” total length (KTK60414)

(4) Pivot Bushing sleeve, ¾” bolt, 1” outside, 4.120 total length (KTKISL100120L)



Due to Covid delays allow for minimum 4-6 week lead time, please contact for product time lines. Most large parts are made to order.


Disclaimer:  T.E.Designs makes no warranties expressed or implied with regard to any product and/or installation including but not limited to the warranties of merchantability and fitness for a particular purpose. TEDesigns products and/or installations are for off-road use only. These products and/or installations therefore do not match with the vehicle manufacturer’s parts or specifications. The purchaser acknowledges that the purchase of these parts and/or installation may cause the vehicle to be unlawful to operate on public highways. The purchaser further acknowledges that no representations have been made to them with regard to the performance, safety or quality of these parts and/or their installation in the purchaser’s vehicle, and that the parts and/or installation may void the vehicle manufacturer’s warranty. TE Designs retains no liability for any damage, injuries, and/or death caused directly or by association with TE Designs products or installation. Purchaser must check with their rule book on cage to meet specs and modify as needed. The purchaser indemnifies TE Designs company name its employees, partners, and affiliates from all liability and waives their right to legal recourse against TEg Designs and its employees, partners, and affiliates. TE Designs is not responsible for shipment damages or lost items during shipment. Customer must take their own actions against the shipping provider and or broker. By purchasing this product you are agreeing to all terms stated.

1 review for 99-06 2wd Chevy Long Travel Kit, discontinued for now.

  1. Brayden Scroggins

    Bought this kit about a year ago and I have absolutely nothing bad to say about it. Every piece fit together perfectly allowing for a quick build time!! Although it is one of the newer kits on the market, I have put it to the test on multiple occasions with no failures or signs of weakness! All geometry from steering to camber change throughout the cycle of the suspension travel is perfect which is very rare for a brand new kit. Pair this up with a rack saver brace and you have one bulletproof front end… amazing job Chris!!

Add a review

Your email address will not be published. Required fields are marked *