Our 55" and 60" trailing arms are designed to utilize a front/frame side bushing kit, however, we highly recommend a 1” anti-wobble uniball kit. This design allows for your bushing kit (or cup) to be welded to a 1/4" main rib and 3/16” side plates. Both 55” and 60” arms are designed with a 2.5 coilover and 4.5 bypass in mind.
- 55" and 60" available
- 3/16” mild steel side and overlay plates
- 1/4" mild steel main rib and weld washers
- Laser cut and CNC bent
- Shock mounting: Front to first shock 28-1/2”, Second shock is 34-1/2”
- Shock holes at centerline
- Extended shock end recommended
- 2" x .250 wall DOM (axle side tube for rear insert)
- Anti-Wobble, weld in tube bung, and bushings NOT included
If you will be using an anti-wobble kit, you may want to create a custom front side gusset strap as we have (shown in photos, not included). The included gusset is designed for a smaller OD bushing kit.
- Parts needed but not included :
Bushing assembly/anti-wobble stop kit
Weld in tube inserts (1-1/2" ID, 2" OD x .250 wall tube)
Rod Ends
Anti-wobble kit we used : TMR Customs Anti Wobble Joints
-If you are not a competent fabricator, please reach out to a local fabrication shop. Anytime you working with complex formed sheet metal, additional work by you may need to be done. We are not able to help you with link geometry. If you are not fully comfortable with how to put these together and do not want to take them to a shop, please do ample amount of research before attempting. This is a highly critical component of your vehicle and the work to complete them should not be taken lightly.
Disclaimer: TE Designs makes no warranties expressed or implied with regard to any product and/or installation including but not limited to the warranties of merchantability and fitness for a particular purpose. TE Designs products and/or installations are for off-road use only. These products and/or installations therefore do not match with the vehicle manufacturer’s parts or specifications. The purchaser acknowledges that the purchase of these parts and/or installation may cause the vehicle to be unlawful to operate on public highways. The purchaser further acknowledges that no representations have been made to them with regard to the performance, safety or quality of these parts and/or their installation in the purchaser’s vehicle, and that the parts and/or installation may void the vehicle manufacturer’s warranty. TE Designs retains no liability for any damage, injuries, and/or death caused directly or by association with TE Designs products or installation. Purchaser must check with their rule book on cage to meet specs and modify as needed. The purchaser indemnifies TE Designs company name its employees, partners, and affiliates from all liability and waives their right to legal recourse against TE Designs and its employees, partners, and affiliates. TE Designs is not responsible for shipment damages or lost items during shipment. Customer must take their own actions against the shipping provider and or broker. By purchasing this product you are agreeing to all terms stated.