- This cage is designed for short bed Tacomas
- CNC cut and bent
- 2″ x .120wa DOM main tubes
- 1.75" & 1.5″ x .120wa DOM tie ins
- Full 360 Degree weldable
- Each tube labeled and marked for adjacent tube placement
- Stock dash and door panels reusable
- Factory heat and AC reusable (slight ducting modification required)
- Heater core stays in factory location
- New fuse block mounts required (not included)*
- Roof mounted crawl control modules will need to be removed/replaced
- Roof sheet metal is removed to allow more head room and a tighter fit
- New front body mount tabs included (x2)
- Vehicles with sunroof will require heavy modification
- Easily modified for your own touches and needs
- Race legal with door bar modifications (Please note, you are responsible for reading rules for your race series rules and following them. You may need to adjust as needed)
- PDF of tube layout provided
- Please note, this kit is tubing only, no strip gussets included
* When creating your new fuse block mounts, we recommend not adjusting wire lengths as this can potentially cause issues within the system.
This kit should be installed by a competent fabricator. If you do not have the confidence to install this properly, please contact your local fab shop. If you have any questions, please email us at sales@tedesigns.com and we would be more than happy to answer any questions.
Disclaimer: All TE Designs products are intended for off-road use only. Proper installation is critical to safety and performance. Any welding or fabrication should be performed by qualified professionals. The customer is responsible for correct installation, inspection, maintenance, and use. Vehicle modifications may affect handling and safety. TE Designs is not liable for damages or injuries resulting from installation, use, misuse, or modification.
