This WIY cage fits 1999-2006 double cab Toyota Tundras.
- CNC cut and bent
- 2″ x .120wa DOM main tubes
- 1.75" & 1.5″ x .120wa DOM tie ins
- Full 360 Degree weldable
- Each tube labeled and marked for adjacent tube placement
- Stock dash and door panels reusable
- Factory heat and AC reusable (ducting modifications required)
- Minor modifications to factory dash bar required to fit a-pillar
- Fuse box must be relocated
- Factory sunroof will require modifications
- Minor modifications to door panels may be required
- Heater core stays in factory location
- Roof sheet metal is removed to allow more head room and a tighter fit
- Front body mount requires modification
- Easily modified for your own touches and needs
- Race legal with door bar modification (Please note, you are responsible for reading rules for your race series rules and following them. You may need to adjust as needed)
- PDF of tube layout provided
* Sunroof modifications : Sunroof assembly must be removed. Fabrication is required to reinstall glass (glue it back in) or create a sheet metal panel to put in place of the sunroof.
This kit should be installed by a competent fabricator. If you do not have the confidence to install this properly, please contact your local fab shop. If you have any questions, please email us at sales@tedesigns.com and we would be more than happy to answer any questions.
Disclaimer: All TE Designs products are intended for off-road use only. Proper installation is critical to safety and performance. Any welding or fabrication should be performed by qualified professionals. The customer is responsible for correct installation, inspection, maintenance, and use. Vehicle modifications may affect handling and safety. TE Designs is not liable for damages or injuries resulting from installation, use, misuse, or modification.
